 |
Tank Manager - automatic tank gauge Web page PDF data sheet
The Tank Manager is a permanently installed inventory and leak detection system for underground and aboveground storage tanks. It is U.L. approved for class II, group D locations. The Tank Manager exceeds all EPA standards as verified by third parties for both a 0.1 and a 0.2 GPH leak detection. It is now available with Continuous In Tank Leak Detection. |
 |
Site Tel - Remote Monitoring Software web page PDF data sheet
Site Tel site and data management software allows you to monitor all sites from a single personal computer. Receiving data from the TM2000, Site Tel provides inventory records, delivery forecasting, alarm status, and much more from your PC. Site Tel also has the ability to troubleshoot and reprogram your sites remotely. Best of all, Site Tel belongs to you. Once you install it on your PC, it is yours to keep. All data is stored on your own hard drive, creating a permanent record of your operations.
|
 |
Liquid Sensor- continuous liquid detection web page PDF data sheet
The Caldwell Liquid Sensor is installed in interstitial spaces, containment sumps, and other places to monitor for fuel leaks. The sensor is nondestructive and recovers as soon as liquid is removed. It discriminates between gasoline products and water. The sensor is 3/4” by 3” in length |
 |
Double Barrel Probe - tank probe Web Page PDF data sheet
The Tank Manager In-Tank Probe is used for inventory measurement and leak tests. The probe is third party tested and approved for both a 0.1 and 0.2 test. The probe fits into a 3 or 4 inch riser and is field adjustable to the size of the tank. Tank sizes of 1 foot to 16 feet are acceptable. |
 |
Brine Sensor - brine reservior monitoring Web Page PDF data sheet
The Caldwell Brine Sensor is used to monitor the brine level in double wall tanks that contain brine in the interstitial space. The change in level is monitored continuously from the top of the sump down. If the level does not fall between the HI and LOW set point, an alarm is generated |
 |
Pressure Transducer - pressure measement Web Page PDF data sheet
The Pressure Transducer is specifically designed for pressure measurements 0-5 through 0-1000 PSI. It is designed to withstand exposure to compatible liquid and media. Available for use in a variety of applications.
|
 |
Vapor Sensor - hydrocarbon detection Web Page PDF data sheet
The Caldwell Vapor Sensor is installed in wells to detect the presence of hydrocarbon vapors and is field adjustable to the background gas levels to prevent false detections. The sensor is nondestructive and recovers as soon as vapors are removed. The sensor is 3/4” by 3” in length. |
 |
External Audible and Visual Overfill Alarm Web Page PDF data sheet
The External Audible and Visual Overfill Alarm is in a water tight enclosure and is designed to be installed outside to alarm of overfills. |
 |
Multiplexer Share channel with probes Web Page PDF data sheet
The Multiplexer is used to share a single homerun cable with an in-tank probe, liquid sensors, and brine sensors. Up to 8 liquid or 4 brine sensors can be attached to one of the Tank Manager input channels. This multiplexing saves installation cost of conduit and wire. The multiplexer is 1" square by 4" long. |
 |
Cathodic Protection Monitor volts and amps Web Page PDF data sheet
The cathodic protection interface controller will allow you to remotely monitor the cathodic protection volts and amps to tanks at the site and print out cathodic protection reports from the Site Tel PC application. The cathodic protection interface controller is wired into the rectifier chassis and connected to TM2000 Tank Manager console. |
 |
Telecom Splitter Telephone line sharing Web Page PDF data sheet
The Telecom Splitter permits use of a single telephone line that is shared between voice and the Tank Manager |
 |
Sump Tester - containment sump tester Web Page PDF data sheet
The Sump Tester, our new Level Change Indicator, is designed to show water level changes on the order of + or - 0.001 inches. This high degree of resolution allows for accurate testing in a minimal amount of time |
